3D Product Showcase

Punch Laser Combined Machine

The flexibility of a fiber laser and the punching/forming ability of a turret punch in one machine offers increased productivity

Check out the 3D model, use your cursor or finger to rotate the image 360 degrees or click on the + or  button for more info

3D model may have features included that are not standard.

  • Optional

  • Hybrid system
  • Optional

  • Optional

  • Optional

  • Optional

  • Optional

  • Optional

  • https://completemachinetools.com.au/wp-content/uploads/2024/04/Blade-and-detach-device-03.png
  • https://completemachinetools.com.au/wp-content/uploads/2024/04/Feeder-04.png
  • Optional

  • Optional

  • Optional

  • Optional

  • Optional

The CNC punch and laser combined machine not only has servo punching processing technology but also has the characteristics of laser cutting efficiency and good cutting quality. The turret/laser combo can realize punching holes, forming, laser cutting and other functions and provide a new intelligent manufacturing solution for your production. The combined machine consists of a punch machine, a laser cutting system and an electrical system. The combined machine adopts a complete set of German Rexroth CNC system and drive.

Rigid Press Frame

Improved stability in the punching process using 12.5% thicker material for the press side frames and improved stiffness of base component.

O-type closed integral welded press frame special for servo punch press

Motion and Table

Improved stability in table motion by utilizing a two point LM guide support for high speed processing. In addition, the ball screws are now used for the X and Y axes providing improved maintenance.

Full Auto Indexed Station

Tools are rotatable in 0.01° increments enabling the processing of complex shaped parts with the minimum number of tools.

Tool change takes less than 3 seconds to complete total turret movement and just 0,6 seconds for single tool.

The turret itself is made of s50C and undergoes rigorous testing.

Automatic Pneumatic Clamps

When punching thinner material, one of the problems is to control the sheet movement at the non-clamping area. To eliminate this matter 3 clamps or more are available.

Automatic Clamp positioning reduces setup time and errors and provides machine runtime flexibility and productivity

Turret Punch System:

Press Capacity300KN
Max. Sheet SizeX axis5000 (With one re-positioning)mm
Y axis1250mm
Max. Sheet Thickness6.35mm
Max. DiameterΦ88.9mm
Max. Nibbling Rate1800hpm
No. of Clamps3pcs
Turret Stations (Auto-index station)32(2B)pcs
No. of Controlling Axis5(X, Y, T, C, A)pcs
Tool Configuration16A/10B/2BAI/2C/2D
Max. Feeding SpeedX axis90m/min
Y axis80m/min
Punching Accuracy±0.10mm

Laser Cutting System

The laser cutting system includes: cutting head, fiber laser generator, gas circuit and water circuit system

ParameterUnittechnical indicators
Laser Power OutputW3000
Working Areamm1500x2000mm
Cutting AccuracyMm±0.1

REXROTH Servo Transmission Technology

Introducing advanced technology and combining with Accurl’s mature products, they develop a high-grade numerical control machine. The system and transmission adopts a complete set of German Rexroth configuration, the main motor is air-cooled and the driving system can be remotely diagnosed, low noise, high speed, and high efficiency features.

Full electrical servo CNC turret punch press:

  • Advanced REXROTH CNC Servo system to control the RAM stroke distance on both ends and depth of each punch with 0.01mm accuracy.
  • The AC punch servo motor can be programmed for various applications.

I) High speed applications.

II) Low noise applications.

III) Forming applications.

Combined Laser Cutting

Punching, forming, marking, bending, laser cutting – all in one.

Servo-electric punching and fiber laser cutting technologies, no laser gas required.

Small floor space needed even with automation modules.

Laser power: 3 kW or 4 kW

Positioning speed: 108 m/min

Max sheet size 1,500 mm x 2,000 mm

Automatic Small Material Chute

Chute size: 420×1300, the workpiece in this size range can be dropped to the bottom finished product drop bin.